The FCX – Flush Cut Diamond Blade is designed to be used on angle grinders for both straight and flush cutting. These blades are fitted with a detachable flange mount with an M14 thread that attaches directly to most angle grinders. The flush face give the opportunity for deep cutting and flat finishing.
| Part No. | Diameter (mm) | Segment Width (mm) | Thread |
|---|---|---|---|
| FCXCEL11522 | 115 | 2.0 | M14 |
| FCXCEL12522 | 125 | 2.2 | M14 |
| FCXCEL23022 | 230 | 2.5 | M14 |
The FCX – Flush Cut Diamond Blade is designed to be used on angle grinders for both straight and flush cutting. These blades are fitted with a detachable flange mount with an M14 thread that attaches directly to most angle grinders. The flush face give the opportunity for deep cutting and flat finishing.
Refer to applications for a comprehensive list of materials suitable for this diamond blade.
| Segment Height | |
|---|---|
| Dry / Wet | |
| Grade | |
| Gullet Type | |
| Recommended Tool | |
| Segment Attachment | |
| Segment Type | |
| Undercutting Protection | |
| Ventilation |
